Filter
Top Products
Page 37
tank heater(s).
NOTE - If the tank heater remains unable to heat,
remove and inspect the heater for cracks in the sheath.
Electronic Models:
1. Disconnect the brewer from the power source.
2. Disconnect wires from heater(s).
3. Check for continuity across the tank heater termi-
nals.
If continuity is present as described, the tank heater is
operating properly.
If continuity is not present as described, replace the
tank heater.
NOTE - If the tank heater remains unable to heat,
remove and inspect the heaters for cracks in the
sheath.
Removal and Replacement:
1. Remove wires from tank heater.
2. Remove the four #8-32 nuts securing tank heater
to tank lid.
3. Remove tank heater and gasket.
4. Install new tank heater and gasket with four #8-32
nuts on tank lid.
5. Refer to Fig. 31 when reconnecting the wires.
SERVICE (cont.)
TANK HEATERS
.
MINUTES
BUNN-O-MATIC
P/N 2620- 120 VAC