Filter
Top Products
Page 21
If continuity is present as described, the contactor is
operating properly.
If continuity is not present as described, replace the
contactor.
Removal and Replacement:
1. Remove all wires from the contactor.
2. Remove the two #10-32 slotted head screw secur-
ing contactor to the inside of the hood.
3. Securely install the new contactor inside the hood.
4. Refer to Fig. 11 when reconnecting the wires.
SERVICE (cont.)
CONTACTOR ASSEMBLY
P828
FIG. 11 CONTACTOR ASSEMBLY TERMINALS
28230 092200