Filter
Top Products
3-662-02575-07
<G> Go -- Allows the user to start the RAW to DCX file conversion. The following steps are processed:
1. The Raw File Conversion screen is cleared.
2. The File Processing popup is displayed.
3. Each file in the current directory is checked to verify if it is a RAW formatted file. If not, it skips this file and checks
the next file.
4. Each RAW formatted filefound within the current directory isconverted tothe DCX formatandstored in the work-
ing directory with the same filename and the new file extension, “.DCX.”
If a problem occurs while converting the RAW file to a DCX formatted file, a message box is displayed with the failed
file and describing the problem. The program will end and return to the MS-- DOS prompt.
TOPIC 5 MICRO-LINKS SELECTION SCREEN
This section describes the features available on the Micro-Links selection screen.
The Micro-Links selection screen will be displayedwhen the DataView program is started withoutbeingconnected to
the Recorder. The user is allowed to select which program to run: the Micro-Link 1 or Micro-Link 2/2i. The following
screen is displayed when the program starts up.
The following is a summary of the options available to the user:
<M> Micro-Links -- Allows the user t o select which program to execute;
1. Micro-Link 1 -- CTD2.exe Interrogation program for the Micro-Link 1 units.
2. Micro-Link 2/2i. -- DataView Interrogation program for the Micro-Link 2/2i units.
<G> Go -- Starts the selected program.