Filter
Top Products
3-3862-02575-07
<S> Sensors -- This allows the user to choose a specific sensor configuration. The user can also choose New
configuration to create a new configuration with desired sensors and then save it into the sensors.cnf file. The
Available Configurations Menu will be updated to include the new configuration. Several configurations can be
created and then saved in the sensors.cnf file for later usage. For further information, refer to TOPIC 20.
<A> Axis -- This automatically scales the X and Y axis on the Graph that is to be viewed.
<P> Printer Setup -- This displays the Printer Configuration Screen, where printer setup options can be selected in
order to print out graphs and data. For further information, refer to TOPIC 17.
<G> Go -- This starts the processing of the file into the format selected for printing. Once the processing is complete,
the report will be sent to the printer (or an ASCII print file).
Restrictions:
1. When custom paper size is selected, the graphic and sensor data cannot be printed. A warning message will be
displayed for the user.
2. When printing t he graphic and sensor data together, the graphic data is printed on the left side of t he page and the
sensor data is printed on the right side of the page. Depending upon the page size and the number of sensors selected,
some of the sensor data may be truncated (i.e., missing data). To avoid this problem print the report with either the
graphic data or the sensor data. If the user wants to print both, go ahead, but run the report a second time with only the
sensor data selected.
<H> Help -- Displays the help screen.
<ESC> Close -- Closes the window and returns the user to the Main Menu Screen. If Print Data is started within the
Interrogation Screen, the user is returned to the Interrogation Screen.