Filter
Top Products
14
DEFINITION OF SCREENS DURING NORMAL OPERATION:
1.
Initialization Screen
Definition – This screen is displayed only during the first few seconds after “power-on”. The only purpose
of this screen is to display the System Software Title (DISPENSER) and Version Number (V #.##).
RESET SYSTEM
COMPLETED
2. Low Water Level Screen
Definition – This screen is displayed after the Initialization Screen during the initial filling of the water tank
(first fill). Once the water in the reservoir tank has reached the appropriate fill level this screen is retired.
PLEASE WAITLOW
WATER LEVEL
3.
Low Temperature Lockout Screen
Definition – This screen is displayed when the Low Temperature
Lockout feature is ON and the present water temperature is below the Low Temperature Lockout trip point.
PLEASE WAITLOW
WATER TEMP.
4. System Rinse Lockout Screen
Definition – This screen is displayed when the Rinse Lockout feature is ON and all Hoppers have met the
conditions for Rinse Lockout. A Hopper will enter Rinse Lockout when the respective Hopper has
dispensed but has not been rinsed for a period of time
g
reater than that defined b
y
the Rinse Lockout Time.
Since the system has no method of recording elapsed time during “power-off”, the system will place all
Hoppers in Rinse Lockout upon “power-on” as a sanitary precaution.
PLEASE RINSE
TO CONTINUE
5. Rinse Screen
Definition – This screen appears when the Rinse Key is pressed while the system is waiting to dispense. If
any of the Dispense Keys are pressed while this screen is being displayed the system will rinse the Hopper
corresponding to the depressed key. If the Rinse Key is released while a Hopper is being rinsed this
screen will remain until the rinse process is complete.
PRESS AND RELEASE
TO RINSE
6. Selection Screen
Definition – This screen is displa
y
ed alon
g
with a Dispense Screen while the s
y
stem is waitin
g
to dispense.
This screen alternates with a Dispense Screen every three seconds.
PLEASE SELECT
CHOICE OF DRINK
7. Portion Control Dispense Screen
Definition – This screen is displayed while the system is waiting to dispense if the Dispense Mode is set to
Portion Control. This screen alternates with the Selection Screen every three seconds.
PRESS AND RELEASE
TO DISPENSE
8.
Free Flow Dispense Screen
Definition – This screen is displayed while the system is waiting to dispense if the Dispense Mode is set to
Free Flow. This screen alternates with the Selection Screen every three seconds.
PRESS AND HOLD
UNTIL 2/3 FULL
9.
Rinse Warning Screen
Definition – This screen appears when the Rinse Warning feature is ON and a Hopper (identified by @)
HOPPER # @MUST BE
RINSED
has dispensed but has not been rinsed for a period of time greater than that defined by (50 * Rinse Lockout Time) minutes.
For example: if the Rinse Lockout Time is 6 Hrs and the Rinse Warning feature is ON then the Rinse Warning will be triggered when
a Hopper is not rinsed for 300 minutes (5 hours). Triggering a Rinse Warning will cause the audible alarm to sound for two seconds
and the Rinse Warning Screen to be displayed for five seconds. The system will then revert back to normal operation. If the
offending Hopper is not rinsed after the first Rinse waning additional Rinse Warnings will be triggered every five minutes until the
respective Hopper is rinsed.
HOPPER #@
MUST BE RINSED
10. Rinse Lockout Screen
Definition – This screen appears when a Dispense Key is pressed corresponding to a Hopper (identified by
@) that has entered Rinse Lockout. A Hopper will enter Rinse Lockout when the respective Hopper has
dispensed but has not been rinsed for a period of time
g
reater than that defined b
y
the Rinse Lockout Time.
Once a Hopper enters Rinse Lockout the LED’s of the Dispense Keys related to that Hopper will turn OFF
thus indicating that the Hopper will no longer dispense.
11.
High Temperature Lockout Screen
Definition – This screen is displayed when the present water temperature is 10 °F above the water
temperature set point.
PLEASE WAIT
HIGH WATER TEMP
12.
HOPPER # @
IS OFF
Hopper Status Warning Screen
Definition – This screen appears when a Dispense Key is pressed corresponding to a Hopper (identified by
@) that has been turned OFF. Once a Hopper has been turned OFF the LED’s of the Dispense Keys
related to that Hopper will turn OFF thus indicating that the Hopper will no longer dispense.