Cecilware GB-IT Hot Beverage Maker User Manual


 
18
PICTURE / DURATRAN REPLACEMENT and BULB AND STARTER REPLACEMENT - ILL. D
To Replace The Picture / Duratran:
Lift up the two end tabs on top of door with a pointed object or flat head screwdriver.
Pull the entire picture frame out. Open up the two clear panels and replace picture.
Tuck clear plastic panel inside bracket at top.
BE SURE TO TUCK CLEAR PANEL UNDER
BRACKET BEFORE SLIDING FRAME ASS'Y
INSIDE DOOR.
OG S GOS
To replace the Fluorescent Bulb:
Remove the inside door panel.
Turn the lamp and pull it out of the lamp
holder, then place the new lamp into the
lamp holder and turn it until it snaps into
position.
To replace the Starter:
Remove the inside door panel.
Turn the starter slightly counter-
clockwise and take it out of the starter
base.
To install the new starter, snap the
starter into the starter base and turn it
slightly clockwise into position.