Filter
Top Products
UGH004/0999 microKool Portable Chillers
INSTALLATION 3-15
Set dip switch 4 to the
ON position.
Close the electrical
enclosure and restore
power to the unit.
When Auto Start is enabled:
◆ The Auto Start indicator light flashes to indicate that the
Chiller can start at any time. The chiller will start whenev-
er the remote switching or timing device sends a signal to
start processing.
◆ The Auto Start indicator light is on whenever the chiller is
under the control of the remote device.
To disable Auto Start:
Repeat steps 1, 2 and 7, setting dip switch 4 to the OFF
instead of the ON position.
INSTALLING THE
AUTO STA RT
FEATURE
(PC-2 CONTROL ONLY)
6
12
3
4
5
6
7
8
7