Filter
Top Products
microKool Portable Chillers UGH004/0999
4-4 OPERATION
POSITIONING
THE
CONTROL
PANEL
The control panel on microKool chillers can be swiveled,
raised and lowered to provide easy viewing and access. The
PC-2 control panel also can be mounted up to 50 feet from
the unit, using a remote control cable and the magnetic back
on the back of the panel.
To raise and swivel the control panel:
Grasp the black control panel
handles, and pull upward. Use
the handles to rotate the control
panel. Do not rotate the panel
360 degrees.
To lower the control panel:
Grasp the black control panel
handles, and rotate the control
until it is aligned with the unit.
Do not rotate the panel 360
degrees. Gently push down on the
handles until the control panel is
flush with the unit.
To detach the PC-2 control panel:
The PC-2 control panel may be removed and mounted up to
50 feet from the unit. Do not stretch the cable. The cable is
available in various lengths so that you can order the appro-
priate cable for your installation.
Grasp the black control panel handles and pull upward. Use
the magnetic back to mount the control panel in the remote
location. Connect the remote-mounted control to the unit with
the cable provided.
CAUTION: Improper use of the swiveling
control panel can damage the unit.
● Do not rotate the control panel 360
degrees. This will twist and possibly damage
the control wiring and connections to the
motherboard in the electrical enclosure.
● Do not use the control panel handles or
control cables to move the chiller. The han-
dles are designed only for orientation of the
control panel.
● Do not mount the detachable PC-2 control
panel to a hot surface.