Filter
Top Products
INSTALLATION
This DishDrawer
®
must be installed and located in accordance with the Installation
Instructions before it is used. If you did not receive Installation Instruction sheets with
your DishDrawer
®
, you can order them by calling your Authorized Service Agent.
Installation and service must be performed by a qualified technician.
If the power supply cord is damaged, it must be replaced by a dealer or Authorized
Service Center or a similar qualified trades person in order to avoid a hazard.
Ensure the DishDrawer
®
is secured to adjacent cabinetry using the brackets provided.
Failure to do so may result in an unstable product, which may cause damage or injury.
Do not operate this appliance if it is damaged, malfunctioning, partially disassembled
or has missing or broken parts, including a damaged power supply cord or plug.
Do not store or use petrol, or other flammable vapors and liquids in the vicinity of the
DishDrawer
®
.
Connect to a properly rated, protected and sized power supply circuit to avoid
electrical overload.
Make sure that the power supply cord is located so that it will not be stepped on,
tripped over or otherwise subject to damage or stress.
Do not install or store the DishDrawer
®
where it will be exposed to temperatures
below freezing or exposed to weather.
Do not use an extension cord or a portable electrical outlet device (e.g. multi socket
outlet box) to connect the DishDrawer
®
to the power supply.
MAINTENANCE
Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in this Use & Care. We recommend that you call an
Authorized Service Agent.
Keep the floor around your appliance clean and dry to reduce the possibility of
slipping.
Keep the area around/underneath your appliance free from the accumulation of
combustible materials, such as lint, paper, rags and chemicals.
When cleaning the underside of the filter plate, care must be taken on the sharp outer
edge to avoid the risk of cut type injuries.