DCS DD224 Dishwasher User Manual


 
2
CONTROLS
If you have a double DishDrawer®, each
drawer has its own controls and can run
independently of the other.
POWER BUTTON
The button turns the DishDrawer®
on or
off. Opening the drawer will automatically
turn the DishDrawer®
on for 30 seconds. To
end a wash program in mid cycle, press the
button. Any water in the DishDrawer®
will be pumped out.
START/PAUSE BUTTON
The button starts a wash program. Press the button to pause or restart the
DishDrawer®
during a wash program. When paused, wait for three beeps before
opening the drawer. Forcing the drawer open while in mid cycle may cause damage
or injury.
DELAY START
The button also sets the Delay Start feature which can delay the start of a wash
program from 1 to 12 hours. This feature also satisfies Shabbat requirements if the
Auto Power option is disabled (see Option Adjustment).
To activate Delay Start
1 Press and hold the button until the light above the button turns purple.
2 Continue holding the button down until the desired delay time has been reached.
The DishDrawer® will emit audible ‘beeps’ as you hold the button down, each
beep indicates another hour delay.
3 The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay Start
Press the button.
Control buttons