Filter
Top Products
22
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Continuous
beeping
A fault has occured. Refer to the Fault codes section.
Intermittent
beeping
DishDrawer® is in pause
mode.
Close the DishDrawer® and press
the button.
DishDrawer®
will not start
Power supply is not
connected.
Connect the power supply.
The drawer is not
properly closed.
Ensure the drawer is firmly closed.
Lock feature is on.
Turn the Lock off. Hold down the
button until the light above the
button disappears.
button not pressed. Press the button.
Excess
water in the
DishDrawer®
Drain hose(s) bent or
kinked.
Straighten the drain hose(s).
Blocked filters and/or
drain hose(s).
Clean the filter plate/drain
filter. Unblock the drain
hose(s). Refer to the user
maintenance section.
Water marks on
the dishes
Insufficient rinse agent. Ensure there is enough rinse agent
in the dispenser.
Rinse agent setting too
low.
Increase the rinse agent setting.
DishDrawer®
overloaded/incorrectly
loaded.
Refer to the section on loading.
Insufficient or no salt
in the water softener
(DD224-H, DD124-H
models only)
Ensure there is enough salt in the
water softener and/or increase the
water softener setting.
Dishes did not
dry
Incorrect loading. Ensure the dishes are not nesting
together.
Rinse agent depleted. Refill the rinse agent dispenser.
Rinse agent setting too
low.
Increase the rinse agent setting.
Eco wash program used. Choose a standard wash program.