Filter
Top Products
®
3
COMPACT
Before First Use
1. Remove all packing materials and literature from inside the ice
cream maker.
2. Wash the Speedee Freeze™ canister, Clear-Vue™ lid and stir pad-
dle in warm soapy water. Rinse and dry all parts thoroughly.
NEVER immerse motor top in water or any other liquid. NEVER
clean any parts ina dishwasher.
Freezing the Speedee Freeze™ Canister
■ Before making frozen desserts, it is very important that the
Speedee Freeze™ canister be properly frozen. The Deni Scoop
Factory
®
Compact features a double insulated bowl that requires
thorough freezing. We recommend placing the Speedee Freeze™
canister upright in the back of your freezer where the temperature
is the coldest.
■ Make sure the Speedee Freeze™ canister is washed and thorough-
ly dried. For best results, wrap canister in a plastic bag.
■ The length of time necessary to properly freeze the canister
depends on the temperature in your freezer. Freezing time can
vary from 8 –24 hours, depending on freezer temperatures
ranging from -30°C/-22°F to -10°C/+14°F.
■ Shake the Speedee Freeze™ canister to ensure a properly frozen
bowl. The canister should have no liquid moving inside. If you
hear liquid, it is not frozen.
■ Keep your Speedee Freeze™ canister in the freezer when not in
use so you can create frozen desserts anytime.
HOW TO OPERATE THE
DENI SCOOP FACTORY
®
COMPACT
1. Place canister in the freezer overnight, (see freezing the
Speedee Freeze™ Canister on pg. 3).
2. Follow the recipes in our instruction booklet. Almost any
frozen dessert recipe can be used providing it does not make
more than 1
1
/
2 quarts.
3. Prepare the ingredients. Note: For best results, leave the mix-
ture in the refrigerator for at least 4 hours until thoroughly
chilled.
4. Place the stir paddle inside the canister. Be sure the star-
shaped knob on the stir paddle faces up.
5. Lock the Clear-Vue™ lid onto the canister. The arrow marked
“unlock” on the bottom of the lid should line up with the
arrow on the canister. Turn the lid clockwise to lock the lid in
place. When placing the lid on the canister, the stir paddle
should also lock into the lid.
6. Place the motor on the lid. Press in the button marked
“PUSH” on the back of the motor. This will allow the paddle
to fit inside the motor.
7. Press on/off switch, located on the top of the motor, to the
ON position. It is important to turn the unit on first before
pouring in the mixture. The stir paddle rotates while the can-
ister remains stationary.
5000 Instructions 9/14/01 9:58 AM Page 3