Filter
Top Products
16/25
©SEIKO EPSON CORPORATION 2008-2009. All rights reserved.
6. 5 TCP/IP menu
This menu can be opened by selecting Device, Configuration, and then the TCP/IP tab.
The TCP/IP menu helps you configure the TCP/IP settings on the network interface.
The following table explains in detail how this menu works.
Item Explanation
Manual, Automatic,
DHCP, BOOTP, RARP
Select the method for assigning an IP address. The choices here vary depending
on the network interface.
If you select Automatic, a different IP address is assigned to the network
interface every time you turn on the device. If you do not have a DHCP server with
DNS support, select Manual here and specify an IP address directly.
If you select Automatic when DHCP, BOOTP, and RARP are all grayed out,
TMNet WinConfig will obtain an IP address from the server by automatically
determining the server type.
Set using Automatic
Private IP Addressing
(APIPA)
If this check box is selected, a private IP address is automatically assigned to the
network interface by APIPA (Automatic Private IP Addressing) when there is no
DHCP server on the network or there is no response from the DHCP server. The
private IP address will be in the range of 169.254.0.1 to 169.254.255.254.
This check box is grayed out if the IP Address Setting is set with Manual or
APIPA is not supported.
Set using PING
Select this check box when setting an IP address using the ARP/PING command.