Filter
Top Products
7/25
©SEIKO EPSON CORPORATION 2008-2009. All rights reserved.
6. Setup Windows
This section explains in full detail the workings of each setup window.
6.1 Opening screen
You will see the TMNet WinConfig opening window when you launch TMNet WinConfig.
Item Explanation
Tree view
Clicking Ethernet, Wireless, or USB (*1) brings up information on the network
interfaces connected to the selected network or port.
Items
The list will be sorted in ascending or descending order of the item you have
chosen, such as IP Address, MAC Address, Printer ID, or Model Name. The
display width for each item can be controlled by dragging the right edge of each
item header.
List view
The information on the network devices connected to the interface you have
selected in the Tree view is displayed here. To start configuration, double-click the
network interface you want to configure, or select the network interface and click
the Configuration button.
Search button
Updates the List view with the latest information by rescanning the interfaces.
Launch Browser button
When the IP address is set to something other than the factory default, you can
launch TMNet WebConfig by selecting a network interface and clicking this
button. Normally you do not need to use this button.
Configuration button
Click this button to start configuring a network interface. It opens the Network
Interface Card Properties window.
(*1) Selection of COM is also possible by customization.