Filter
Top Products
18/25
©SEIKO EPSON CORPORATION 2008-2009. All rights reserved.
Item Explanation
Communication Mode
Select the wireless LAN mode.
SSID
Enter the SSID for the wireless LAN group to connect to. It is initially set to
EpsonNetIBSS, but make sure you change this value.
It only accepts ASCII, up to 32 characters.
You can enter either name of ESS ID and SSID here.
Enter the ESS ID of the access point if the wireless LAN group operates in the
Infrastructure mode.
Channel
Only available when the wireless LAN operates in the Ad Hoc mode. Specify the
same channel as used on the wireless LAN.
WEP
Select this check box when using WEP Keys for encryption.
Input using hex
Select this check box when entering WEP Keys in hexadecimal.
The default is to enter them in ASCII.
Active WEP Key
When more than one WEP Keys are specified, choose one as the active key.
WEP Key Length
Select the length of a WEP Key. This indicates the strength of the encryption.
WEP Key (1 to 4)
Enter WEP Keys
The exact format for a WEP Key varies according to the values in the fields Input
using hex and WEP Key Length.
For a 64-bit (40-bit) WEP Key, use 10 digits in hexadecimal or 5 characters in
ASCII.
For a 128-bit (104-bit) WEP Key, use 26 digits in hexadecimal or 13 characters in
ASCII.
The WEP Keys you enter here will all become hidden from view after the network
interface is configured. Do not forget your WEP Keys.
WPA/WPA2
Select this check box when using WPA/WPA2 with a PSK (Pre-shared Key) for
encryption.
Grayed out when your network interface does not support WPA/WPA2.
PSK (Pre-shared Key)
Enter the PSK (Pre-shared Key) password (with 8 to 63 ASCII characters) to be
used for WPA/WPA2 authentication.
Advanced Settings...
button
Click this button if you want to proceed to make advanced settings on the wireless
LAN. Normally you do not need to change them. Do it only if you need to improve
wireless communication performance.
See 6.6.1 Wireless Advanced Settings dialog box for more information.
OK button Click the OK button to save new settings. The password is required.
Cancel button Click the Cancel button to discard any changes.