Filter
Top Products
9/25
©SEIKO EPSON CORPORATION 2008-2009. All rights reserved.
Item Explanation
Time Before
Declaring
Communication
Error
Specify (between 6 and 120 seconds) the timeout time at which a communication
error is triggered. The default value is 6 seconds. Normally you need not change
this value.
Specify a larger value for this if you see a communication error after you have
changed the search options so that other network segments are to be searched as
well.
A larger timeout value means more time required to search for network interfaces.
OK button Click the OK button to save your settings.
Cancel button Click the Cancel button to discard any changes.
6. 2. 2 Search Paths
This window can be opened by selecting Tool and then Search Paths.
In this window, you can select the protocols that are used for searching for network interfaces.
The following table explains in detail how this setup window works.
Item Explanation
Search Setting Select the preferred protocols used to search for network interfaces.
TMNet WinConfig will use these protocols when it searches for network interfaces.
OK button Click the OK button to save new settings.
Cancel button Click the Cancel button to discard any changes.