Filter
Top Products
Setting the SCSI ID with the DIP Switches
To set the SCSI ID using the DIP switches, follow these
steps:
1. Locate the SCSI ID DIP switches on the back of the
tape drive, as shown in Figure 1.
2. Change the DIP switch settings to the correct SCSI
IDforyourconfiguration.Figure2showsthe
settings for SCSI IDs 0 through 7.
3. Make sure that the remote switch or jumpers are set
to SCSI ID 0.
Figure 1 SCSI ID DIP switches and jumper block
12 EXB-8500/EXB-8500c 306261