Filter
Top Products
4. Push the door shut and wait while the tape drive
loads the tape and positions it at LBOT. When the
amber LED is off and the green LED is on, the tape
is loaded and the tape drive is ready.
5. Write approximately 500 MBytes of data to the tape.
6. Read the data written in step 5.
7. Repeat steps 5 and 6 at least two times or for two
hours (whichever is greater).
Note: If errors occur, reset the tape drive and
repeat steps 5 though 7 as appropriate. If the
error recurs, contact your vendor.
When you have completed step 7, the tape drive is ready
for normal operation.
22 EXB-8500/EXB-8500c 306261