Filter
Top Products
30
CARE AND CLEANING
Replacing the oven light bulb(s)
Note: oven bulb replacement is not covered by your warranty.
LEFT LAMP (some models only)
1 Let the oven cavity and the grill element cool down.
IMPORTANT!
Disconnect the oven from the power supply before continuing.
2 Remove the left side rack (and catalytic panel if fitted). See ‘Removing and refitting the
side racks (and catalytic panels if installed).
3 Press down on the lamp cover and rotate to remove.
IMPORTANT!
Never use screwdrivers or other utensils to remove the lamp cover, as doing so could
damage the surrounding enamel. Only use your hands.
4 Unscrew and replace the bulb with a new one suitable for high temperatures (300
o
C)
with the following specifications: 220-240V, E14 and same wattage as the bulb being
replaced (check wattage stamped on the bulb).
5 Refit the lamp cover, operating in reverse order. Make sure that it clicks into place.
IMPORTANT!
The notch in the inner edge of the cover must be on the side closer to the back of the
oven.
6 Refit the left side rack (and the left catalytic panel if fitted).
7 Turn the power to the oven back on. If your model has an electronic clock, set the clock.