Filter
Top Products
4-38
NOTE: In September 1999, significant changes were made to the design of the filter base
assemblies used in BIH52 fryers. The most visible change was the removal of the casters on all
assemblies except 806-8804 (which is used in units manufactured for sale primarily in Japan). The
motor cover was also redesigned and a lower plumbing shield was added. Additionally, the two-
piece motor support (P/Ns 900-7469 and 900-7470) was replaced with a single, stronger support.
In order to provide continued support for units built prior to August 1999, a new filter base assembly
with casters (P/N 106-0043SP) was created to replace the original 806-5895 filter base assembly,
which is no longer available.
Two additional modifications to the design of the base sides have been made since August 1999.
These include the replacement of the die-cast metal handles with handles formed into the sides, and
the replacement of the separate lock brackets with brackets that are also formed into the sides.
ITEM PART # COMPONENT
1 900-5477 Cover, Motor (September 1999 and later) (used with all three assemblies)
* 824-0558 Cover, Motor (Prior to September 1999)
2 900-1949 Standoff, Filter Wiring Box (used with all three assemblies)
3 900-7557 Cover, Suction Tube (used with all three assemblies)
4 900-9634 Shield, Filter Plumbing (used with all three assemblies)
5 810-0949 Caster, 2.5-inch Swivel (also used in original 806-5985 assembly)
6 806-9153 Side, Left Filter Base (used in 106-0043SP)
7 806-9150 Side, Right Filter Base (used in 106-0043SP)
8 823-2289 Support, Filter Pan (used in all three filter base assemblies)
9 900-5396 Support, Filter Motor (used in all three filter base assemblies)
10 826-1374 Screw, #10 x ½-inch Washer Hex Head (Pkg of 25)
11 810-0180 Handle, Plated Die-cast Metal
12 826-1360 Screw, 10-24 x 5/16-inch Round Slotted Head (Pkg of 25)
13 201-3770 Side, Left Filter Base (used in 806-8648SP)
14 202-3770 Side, Right Filter Base (used in 806-8648SP)
15 806-9154 Side, Left Filter Base (used in 806-8804SP)
16 806-9151 Side, Right Filter Base (used in 806-8804SP)
17 810-1211 Caster, BIH52 Rigid (used in 806-8804SP only)
18 900-1953 Bracket, Filter Lock (used on base assemblies prior to September 1999)
* 809-0440 Nut, 5/16-inch Keps Hex (used for securing casters to base assemblies)
* 826-1677 Pin Extension Kit
* Not illustrated.