Filter
Top Products
Page 26
Part # MCOSM06 Rev 1 (11/03/08)
MOTOR CARE
The motor on your convection oven is maintenance free since
it is constructed with self-lubricating sealed ball bearings.
It is designed to provide durable service when treated with
ordinary care. We have a few suggestions to follow on the
care of your motor. When the motor is operating, it cools
itself internally by air entering at the rear of the motor case,
provided proper clearance has been allowed.
Since the blower wheel is in the oven cavity it is at the same
temperature as the oven. If the motor is stopped while the
oven is hot, the heat from the blower wheel is conducted
down the shaft and into the armature of the motor. This
action could shorten the life of the motor.
We recommend, at the end of the bake or roasting period,
when the oven will be idle for any period of time, or before
shutting down completely, that the doors be left open
slightly, and press the COOL DOWN key on the control panel.
The fan will continue to run until the oven cools down to
150°F (66°C). At the end of the day, press the ON/OFF key to
activate the Auto Cool Down feature. The fan will run on high
until the oven cavity drops below 150°F (66°C). During this
time the "AUTO COOL DOWN" LED will light. When the oven
temperature drops below 150°F (66°C) the oven turns o.
This feature protects the oven motor from pre-mature failure.
Optimal cool-down will be achieved with the door open
slightly.