Filter
Top Products
Part # MCOSM06 Rev 1 (11/03/08) Page 57
CONTROLS
Display Codes – Prompts
OFF
Oven is in the OFF mode.
Lo
Oven cavity temperature is below set point.
Hi
Oven cavity temperature is above set point.
LOAd
Oven cavity has reached set temperature - prompt for operator to load oven.
SETb
Oven has defaulted to factory set back temperature.
Auto
Oven is in 'auto cool down' mode and will remain in auto until cavity temp is below 150°F.
OPEn
Display will toggle from 'OPEN' to 'DOOR' to prompt for operator to open door when unit is in cool down.
Door
Door
In auto cool down mode, door is open past 30° or in cooking mode, door is opened.
Prob
Open or shorted cavity sensing probe.
HELP
Oven cavity has exceeded 560°F.
CodE
475 controllers, prompt for operator to enter access code from programming 4-2-7-5.
SHLF
475 controllers, prompt for operator to select shelf to be programmed.
PR-
475 controllers, prompt for operator to program the prole for the second cook time if required.
PRE
475 controllers, prompt for operator to set pre-alarm if required.
HoLd
475 controllers, prompt for operator set the hold temperature the oven is in programmed HOLD
temperature.
FAn
475 controller, prompt for operator to se fan speed.
DonE
Oven has completed its cooking cycle.
CooL
Door is open less then 30° in cool down mode.