Filter
Top Products
03/09/09 P/N 4523367 Page 10
11) Assemble New Pilot Assembly
A colored line on the top of the pilot indicates the type of fuel used. A BLACK line is used
on a natural gas pilot, whereas a RED line is used on a propane pilot. Ensure the
proper pilot is used.
Insert sheath onto new pilot assembly ignition wire
Push sheath onto wire until about 1 inch of orange ignition wire protrudes from the free
end
New pilot assembly with sheath inserted onto ignition wire
Use electrical tape to secure the free end of the ignition wire and the end of the
sheath. Use only enough tape to cover up exposed orange ignition wire. Do not tape
over the hole at the tip of the wire.
Leave about 1” of ignition wire protruding before applying electrical tape