Filter
Top Products
03/09/09 P/N 4523367 Page 3
3) Unscrew Igniter Bracket
Unscrew the two screws holding down the igniter bracket to the orifice bracket.
Left: Before removal, location of screws shown by arrows
Right: After removal
4) Remove Door Springs
Once the springs are removed, the oven door will be free to fall. Use a strong tape to
keep the oven door closed for safety purposes.
For the door hinge with no microswitch:
Insert a long screwdriver underneath the bell crank assembly such that the tip
extends behind the air shield. See the following pictures for details.
Insertion of screwdriver underneath bell crank assembly and air shield