Filter
Top Products
03/09/09 P/N 4523367 Page 17
19) Screw on Pilot Gas Flex Tube, Adjust Main Burner Gas Fitting
Remove the brass nut and ferrule originally on the pilot gas outlet on the Baso valve
(Part 5 and Part 6, Assembly Drawing). Install them onto the free end of the flex tube.
Screw the pilot gas flex tube onto the Baso valve pilot gas outlet. This step should be
done first to minimize stress on the flex tube during later steps.
The fitting on the Main Burner Gas Inlet needs to be turned 180 from its original position,
with the opening facing the right side of the oven. Loosen the nut, twist the fitting, and
ensure that the nut is tightened properly once it is facing the right direction.
Pilot Gas Flex Tube attached; Gas fitting turned around
Main Burner gas
fitting turned 180,
facing right side of
oven