Filter
Top Products
03/09/09 P/N 4523367 Page 12
Attach new Robertshaw thermocouple to pilot assembly
Push the thermocouple all the way into its slot on the pilot.
Left: Wrong installation. Thermocouple not pushed all the way through socket.
Right: Correct installation. Thermocouple pushed all the way through socket.
12) Attach New Pilot Assembly to Welded Bracket on New Burner
The pilot mounts onto the welded bracket using a single screw
Bend the thermocouple and flex tube approximately as shown in the picture. This will
help with installing them through the front shielding.
New pilot assembly attached to welded bracket on new burner.