Filter
Top Products
03/09/09 P/N 4523367 Page 2
Instructions:
1) Remove Kick Plate
Unscrew and set aside
This kick plate will not be reinstalled. A replacement is provided in the kit.
2) Remove Safety Valve
The following steps will apply for a Baso Valve:
1) Unscrew 11/16” compression nut on oven orifice fitting.
2) Unscrew 11/16” compression nut on 11/16” elbow on Valve Main Burner Gas Inlet.
Elbow itself should still be connected to Main Gas Inlet but detached from valve.
3) Unscrew 7/16” compression nut on Pilot Gas Inlet.
4) Unscrew 7/16” compression nut on Pilot Gas Outlet.
5) Unscrew 3/8” thermocouple nut.
6) Unscrew #10 sheet metal screw holding valve bracket onto lower front frame.
7) Remove valve.
Baso Safety Valve: Prior to removal
1
2
4
5
6
3