Filter
Top Products
03/09/09 P/N 4523367 Page 19
21) Connect Remaining Tubes and Thermocouple
The free end of each 7/16” flex tube from the valve should be fitted with a 7/16” nut (Part
10, Assembly Drawing) and 7/16” ferrule (Part 11, Assembly Drawing).
Connect the 7/16” flex tube and the thermocouple. Tighten all connections.
The final tube connections should be comparable to the picture below.
Final Tube Configuration
22) Attach Lighting Instructions to Valve Bracket
The pilot lighting instructions are riveted on through the two holes in the bracket.
Ensure that the instructions are mounted in the correct direction shown below.