Filter
Top Products
27
Replace the smaller rings on the
outer burners. The very small ring is
for the right hand front burner.
Screw in the hexagon headed venturis but to make
fitting the other burners easier do not fully tighten yet.
an outer burner
When all the burner bases and venturis have been fitted
tighten the venturi nuts.
Reassemble burner heads, making sure they are
reassembled in the correct way on the burner bodies.
base of cook top burner bottom of burner head
Refit the pan supports.
Reassemble in reverse order.
Stick the appropriate label on to the data badge to
indicate the gas the appliance is now set for.
Connect the appliance to the gas supply.
The gas pressure can be measured at the pressure test
point on the gas inlet. Turn and light one of the hotplate
burners.