GE JCS57 Range User Manual


 
Your oven temperature is controlled very accurately
NO~:
When the oven gets hot, the top and outside
using an oven control system. We recommend that
surfaces of the range get hot too.
you operate the range for a number of weeks using the
time given on recipes as a guide to become familiar
with your new oven’s performance.
How to Set the
Mnge
for
Preheattig
(Mght
Oven)
Preheating is
genertily
done before baking. The oven
1. Turn the OWN SET knob to
B=.
should be preheated to the temperature you want
2. Turn the
OWN
~MP
knob to the desired
udess your recipe says not to.
temperature setting.
To
avoid possible
bum,
pla~
the shelves in the
3. When the oven has
preheate~
the Oven Cycling
correct position before you turn the oven on.
Light
wfll
go out.
~s
indi~tes
the oven has
reached the set temperature.)
How to Set the
Mnge
for
BaMg
@ght
Oven)
To
avoid possible
b-s,
place the
shelvm
in
the correct position before you turn the oven on.
1. Turn the
O-
SET knob to
B=
and
the
OWN
TEMP
knob to the temperature
in the recipe.
2. Check food for doneness at minimum time
in the recipe. Cook longer if necessary.
3. Turn the
OWN
SET and the
OWN
TEMP
knobs
to
0~
and then remove the food from the oven.
@@
Ow
muP
o
OWN
SH
How to
~me
Bake
@ght
Oven)
The automatic oven timer controls are designed
to turn the oven on or off automatidly at specific
times that you set.
fiamples
of Immediate Start and
Automatic Stop (the oven turns on now and you set
it to turn off autornatidly) or Delay Start and
Automatic Stop (setting the oven to turn on
automatidly at a later time and turn off at the preset
Stop Time) till be described
On model
JCP67,
the STOP and
ST~T
dids are
different in
a~warance
ti
the dids on the
J~57.
However,
th~~
do operate in the same manner.
NO~:
Before beginning, make sure the clock
shows the correct time of day.
[odels
JCS57
and
JCS67
Model
JCP67
14