GE JCS57 Range User Manual


 
CM
N
CL~G
(continued)
Oven Light
To
remove the
tight
bdb:
1.
Swing the wire to the side and hold.
2. Lift off the
@ass
lens.
3. Remove the bulb.
The
oven light has a
@ass
lens held in place with a
To replace the light bulb:
spring wire to protect the oven
bdb
from the heat of
1. Insert a new
~
watt appliance bulb.
the
oien.
-
2. Replace the lens over the socket.
CA~ON:
Before replacing your oven bulb,
3. Swing the wire over the glass lens.
disconnect the electrical power for the range at the
4. Reconnect the
electnd
power to the range.
main fuse or circuit breaker panel or pull the plug.
Be sure to let the light cover and btib cool
~mpletely
NO~:
The glass lens must be in
pla~
whenever
before removing or replacing.
the oven is in use.
Broiler Pan and
Mck
After broiling,
remove the broiler pan from the oven.
Remove the rack from the pan. Carefully pour out
grease from the pan into a proper container. Wash and
rinse the broiler pan and rack in hot water with a
soapfilled
or plastic scouring pad.
If food has burned on,
sprirdde
the rack with
detergent
whfie
hot and cover with wet paper towels
or a dishcloth. Soaking the pan
wdl
remove burned
on foods.
The broiler pan may be cleaned with a commercial
oven cleaner. Do not use an oven cleaner on the rack.
Both the
brofler
pan and rack can also be cleaned in
the dishwasher.
Do not store a soiled
broder
pan and rack anywhere
in
the range.
Do
not clean the broiler pan or rack in the
se~-cleaning oven (on some modek).
Oven Shelves
Clean the shelves with an abrasive cleanser or
steel wool.
After cleaning, rinse the shelves with
clean water and dry with a clean cloth.
NO~:
The oven shelves maybe cleaned in the
self+l~ng
oven (on some models). However, they
wtil
darke~
lose their luster and become hard to slide.
Wipe the shelf supports with rooking
oti
after
self-
cleaning to make shelves slide more
easdy.
Oven Heating Elements
Do not clean the bake element or the
broti
element
Broil Element
hy
soil will bum off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor.
H
sptilovers,
residue or ash accumulate
Bake Element
around the bake
element gently wipe around the
element with warm water.
%