Filter
Top Products
Popcorn
Note:
Use of the metal Double Duty’
[
’
M
shelf with Popcorn program is
NOT recommended.
Step 1: Remove the outer wrapper
from
the
microwave popcorn.
Step 2: Open oven door
and
place
package of popcorn in the center of
the oven
floor
as directed by the
manufacturer’s instructions. Close
oven door.
~m~
Step 3
Touch
POPCORN
pad
~m~
Step 4:
Touch
START
The
popcorn
senior automatically
calculate~
the
coohlng
time
After
the popcorn sensor detects
steam, the oven signals and
displays remaining cooking
time needed.
Step 5: When cooking is
completed, the oven signals and
flashes “End.” Open the door and
remove the popcorn.
How to Adjust the
POP Program to
Provide a Shorter or
Longer Cook Time
If your favorite popcorn is not
completely popped, there is a
simple adjustment you can make.
Touch the POPCORN pad and then
touch number pad 9. The word
“POP”
will
appear on the display
with a plus sign beside it. The
plus
sign indicates
20
seconds more
cooking time is being provided.
If your favorite popcorn is
over-cooked, there is another
adjustment you can make.
Touch the POPCORN pad and then
touch
number
pad 1. The word
“POP”
will
appear on the display
with a minus sign beside it. The
minus sign indicates
20
seconds
less cooking time is being provided.
Questions and Answers
Q. 1 set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn’t done. What happened?
A. Since house power varies due to
time or location, many Time Cook
recipes give you
a
time range to
prevent overcooking. Set the oven
fOr
minimum time, test the food
for
doneness, and cook your food a
little longer, if necessary.
Q. I touched the number pads
and selected my power level.
When I touched START,
however, my oven didn’t come
on. Why not?
A.
The TIME COOK I
&
11 pad
must be touched before setting the
number pads or else your oven will
not
begin cooking.
Q. I want to cook on a power
level other than High. What do I
need to do?
A. To cook on a power level other
than High, first touch the TIME
COOK
I
& II pad and set the
desired cooking time. Then touch
the POWER LEVEL pad.
“POWER 10” appears on the
display panel. Enter new power
level
number and touch START.
Q. Can
I
interrupt my Time
Cook function to check the food?
A. Yes.
To resume cooking, simply
close
the door and press the
START pad. The timer must be
reset for cooking to resume unless
time is remaining
on
timer.
Q. I opened the door to check on
the popcorn and “Error”
appeared on the display. Why?
A. The Popcorn program first
detects steam and then switches to
Time Cook. If you open the door
while “POP” is displayed, “Error”
will appear. Close the door, touch
CLEAR/OFF
and
begin again. You
may open the door when “End”
uppears
on display.
11