GE JGSP30 Range User Manual


 
ADJUST THE OVEN
THERMOSTAT—
DO IT YOURSELF!
You may feel that your new oven cooks differently
than the one it replaced. We recommend that you
use your new oven for a few weeks to become more
familiar with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot or too cold,
you can adjust the thermostat yourself. If you think
it is too hot, adjust the thermostat to make it cooler. If
you think it is too cool, adjust the thermostat to make
it hotter.
We do not recommend the use of inexpensive
thermometers, such as those found in grocery stores,
to check the temperature setting of your new oven.
These thermometers may vary 20-40 degrees.
To Adjust the Thermostat:
(’-]
1.
press the
BA~pad,
II
BAKE
(
J
2. Select an oven temperature between 500°F.
and
550”F.
3. Immediately, before the BAKE indicator stops
flashing, press and hold the BAKE pad for about
4 seconds. The display will change to the oven
adjustment display.
4. The oven temperature can be adjusted up to
(+)
35”F.
hotter or (-)
35°F.
cooler. Use the
INCREASE or DECREASE pads to select the
desired change in the display.
c1
5. After you have made the adjustment,
CLEAR
press the CLEAR/OFF pad to go back
OFF
to the time of day display. Use your oven
as you would normally.
NOTE: This adjustment will not affect the broiling
or self-cleaning temperatures. It will be retained in
memory after a power failure.
20