Filter
Top Products
How to Use the Minute/Second Timer
@
‘ The MIN/SEC TIMER has three
I
timing functions:
● It operates as a minute timer.
● It can be set to delay cooking.
● It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwaveenergy.
How to llme a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER pad.
The display shows :0 and “ENTER
TIME” flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows 3:00 and “TIMER:’
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes “TIMER;’ and displays :0.
5. Touch MIN/SEC TIMER pad to
reset display to clock or microwave
cook or defrost programs.
Programming a HOLD
TIME
The Minute/Second Timer can also
be used to program “hold time”
between microwave cooking
functions. The time can range from
one second to 99 minutes and 99
seconds. A HOLD, or “standing”
time may be found in some of your
own recipes or cookbook.
Programming Delayed
Cooking
To delay cooking up to 99 minutes and
99 seconds, touch TIME COOK,
TEMP COOK/HOLD or AUTO
ROAST and enter cook time, temp.
or code. Touch MIN/SEC TIMER
and enter number of minutes to
delay cooking. Touch ST~. Timer
will count down to zero and cooking
will begin. When delaying temp.
cook or auto roast, be sure probe
is in fd before pressing ST~.
How to Defrost, Hold and
Time Cook
Let’s say you want to defrost a fiuzen
casserole for 15minutes, hold for
10minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer
and place in oven.
Step 2: Touch TIME DEFROST.
The display shows :0 and
“POWER 3? “ENTER MICRO
DEF TIME” flashes.
Step 3: Touch pads 1,5,0 and Ofor
15minutes defrosting time. 15:00
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step 4: Set standing or hold time
by touching MIN/SEC TIMER.
The display shows :0 and
“ENTER TIME” flashes.
Step 5: Touch 1,0,0 and Oto hold
for ten minutes. 10:00 appears on
display and “TIME” flashes.
Step 6: Touch TIME COOK pad.
The display shows :0 and
“POWER 10?’“ENTER MICRO
COOK TIME” flashes.
Step Z Touch 2,5,0 and Ofor
twenty-five minutes of cooking time.
“MICRO COOK TIME” flashes
and 25:00 and “POWER 10”appear
on display.
Step 8: Touch START. “MICRO
DEF TIME” and 15:00 counting
down show on display. As each
function is automatically
performed, the oven display shows
instructions entered and the
function.
Step 9: When time is up, the oven
signals and flashes “Endl’
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Defrost and amount of
time. Then program Hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
NUI’E: Let foods remain at room
temperature only as long as safe.
Times will vary.