Filter
Top Products
19
Care and Cleaning
Induction Cooktop
Control lock
pad
As a convenience, you can lock the entire
cooktop at any time when it is not in use or
before cleaning.
Locking the cooktop will prevent surface
elements from being turned on accidentally.
Begin by locking the cooktop; see
Control Lock.
How to remove
protective
shipping film
and packaging
tape
Carefully grasp a corner of the protective shipping
film with your fingers and slowly peel it from the
appliance surface. Do not use any sharp items to
remove the film. Remove all of the film before using
the appliance for the first time. To assure no damage
is done to the finish of the product, the safest way to
remove the adhesive from packaging tape on new
appliances is an application of a household liquid
dishwashing detergent. Apply with a soft cloth and
allow to soak.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
Normal
daily
cleaning
Use CERAMA BRYTE
®
Ceramic Cooktop Cleaner on
the glass cooktop.
To maintain and protect the surface of your glass
cooktop, follow these steps:
1 Before using the cooktop for the first time, clean it
with CERAMA BRYTE
®
Ceramic Cooktop Cleaner.
This helps protect the top and makes cleanup
easier.
2 Daily use of CERAMA BRYTE
®
Ceramic Cooktop
Cleaner will help keep the cooktop looking new.
3 Shake the cleaning cream well. Apply a few drops
of CERAMA BRYTE
®
Ceramic Cooktop Cleaner
directly to the cooktop.
4 Use a paper towel or CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops to clean the entire
cooktop surface.
5 Use a dry cloth or paper towel to remove all
cleaning residue. No need to rinse.
NOTE: It is very important that you DO NOT heat
the cooktop until it has been cleaned thoroughly.
Clean your cooktop after each spill.
Use CERAMA BRYTE
®
Ceramic
Cooktop Cleaner.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.