Filter
Top Products
21
Care and Cleaning
Induction Cooktop
Glass surface—
potential for
permanent
damage
Damage from sugary spills and melted plastic:
1 Turn off all surface elements. Remove hot pans.
2 Wearing an oven mitt:
a. Use a single-edge razor blade scraper
(CERAMA BRYTE
®
Ceramic Cooktop Scraper) to
move the spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
3 Any remaining spillover should be left until the
surface of the cooktop has cooled.
4 Don’t use the surface elements again until all of
the residue has been completely removed.
NOTE: If pitting or indentation in the glass surface
has already occurred, the cooktop glass will have to
be replaced. In this case, service will be necessary.
Metal marks
and scratches
1 Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the
cooktop surface.
These marks are removable using the CERAMA
BRYTE
®
Ceramic Cooktop Cleaner with the
CERAMA BRYTE
®
Cleaning Pad for Ceramic
Cooktops.
2 If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave
black discoloration on the cooktop.
This should be removed immediately before
heating again or the discoloration may be
permanent.
WARNING: Carefully check the bottom of pans
for roughness that would scratch the cooktop.
Our testing shows that
if you are cooking high
sugar mixtures such as
jelly or fudge and have
a spillover, it can cause
permanent damage to
the glass surface
unless the spillover is
immediately removed.
To order CERAMA BRYTE
®
Ceramic Cooktop
Cleaner and the cooktop scraper, please call
our toll-free number:
National Parts Center 800.626.2002
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner . . . . . . . . . . . .# WX10X300
CERAMA BRYTE
®
Ceramic
Cooktop Scraper . . . . . . . . . . .# WX10X0302
Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE
®
Cleaning Pads for
Ceramic Cooktops . . . . . . . . .# WX10X350
To order parts