Filter
Top Products
of cook cycles that have been cooked for a particular product.
16
Select Function
Switch (Program
Mode Only)
This switch will change the function that is being programmed
such as time, temperature, alarm, etc.
17
Select Product
Switch
This switch selects the product you wish to cook or program.
18
19
Select Time
Switch
Function Display
(Program Mode
Only)
The select time switch selects the interval within a product.
There are ten intervals per product.
The function display will show you the function you are in
when programming.
20127 Primary and
Secondary
Contactor
The contactors are relays that route power to the heating
elements. The primary relay coil is in series with the high
temperature control and the secondary relay coil is in series
with the heat control circuit.
21
22
Thermal Sensor
High Limit
Thermostat
The thermal sensor determines the shortening temperature.
The high limit thermostat is a manual reset control that senses
the shortening temperature in the event the temperature
exceeds the safe operating limit.
23
Transformer The transformer is a step down type transformer. It converts
high voltage to lower voltage.
24125
I
Fuses
I
The fuses provide an overload protection for the control panel.
26
Fan
The fan’s function is to eliminate any heat build up inside the
control panel area.
Back-Up High
Limit Thermostat
(Not Shown)
This is a back-up high limit thermostat in the event the
temperature exceeds the safe operating limit.