Filter
Top Products
4-3. I ING
8. Also, with the Product LED flashing, pressing the right
Up and Down Switches will access the Idle Mode
parameters. The idle LED will be flashing, the left display
will continue to show “Slct” and the right display shows
“Prod.” Pressing the Set Switch allows the operator to
program the idle parameters (See Section 4-3).
The Idle Mode must be enabled for the operator to access this
mode.
1. While in the Second Program Mode, and the Product LED
is flashing, press the right Up and Down Switches to select
the idle mode items. The Idle LED will be flashing.
2. Press the Set Switch and the Time LED flashes, the left
display shows “idle,”
and the right display shows “ON or
OFF”. Pressing the right Up and Down Switches to turn
idle on or off.
3. Press the Set Switch and the Time LED flashes. The left
display shows “Auto” and the right display shows
automatic idle time. Adjust the automatic idle time with
the right Up and Down Switches, and to disable the auto
idle feature set time to “OFF.”
4. Press the Set Switch and the Temperature LED flashes.
The left display shows “F” or “C”, and the right display
shows the idle temperature setpoint, which can be adjusted
with the right Up and Down Switches.
5. Press Set Switch and the Product LED flashes. Press and
hold the Set Switch to exit the program mode or continue
to the third level program mode.
The Third Level Program Mode allows the operator to enable,
or disable “global” setpoints, program Fahrenheit or Celcius,
probe calibration, alarm duration, and hold duration.
1. While in the d level program mode, press and hold Exit
Melt and Temp switches until the buzzer sounds, and the
left display flashes “glob” and OF”, and the right display
shows “ON” or “OFF.” Pressing the right Up and Down
Switches enables, or disables the global setpoint
programming.
2. Press the Set Switch and the left displays shows “deg”
and the right display shows “OF” or ““C.” Pressing the
right Up and Down Switches allows the operator to select
Fahrenheit, or Celcius.
2nd