Filter
Top Products
19
c)
"READY" Lamp
Lights up when the auto fi ll cycle completes and the dishwasher is ready to wash.
d)
"WASH" Lamp
Lights up during washing operation.
e) Up Button, Down Button
Indicates the total hours of operations in six digits by two digits each time.
Example: 123,456 hours are indicated by
Press to stop the beep in case of error.
Service personnel also use these buttons to change the controller settings.
f) Display
Indicates wash water temperature in wash cycle, rinse water temperature in rinse cycle,
and error codes in case of trouble.
g)
"CHANGE" Button
Press to change the wash water temperature shown in the display to the rinse water
temperature.
h)
"ON/OFF" Button
Turns on/off the power for operation.
i) Conveyor Speed Switch
Located on front panel. Changes the rack conveyor speed in three levels (high = 240
racks/hour, medium = 200 racks/hour, low = 160 racks/hour).
7. Service Menu and Error Log
The service menu ("01" to "19" and "21" to "25") may be used to change settings, acquire
diagnostic information, and to view error history.
a) Service Menu Access
• Enter Service Menu: Use the "ON/OFF" button to turn off the unit. Press and hold the
"CHANGE" button, then press the "ON/OFF" button. "01" should appear on the display.
• Scroll: Use the up and down arrow buttons to scroll through the service menu list, settings,
and data.
• View Service Menu Setting: Press the "CHANGE" button to view the selected menu
setting.
• Change Setting: Use the up and down arrow buttons to change the setting value.
• Return to Service Menu List: Press the "CHANGE" button once again to return to the main
service menu list.
• Exit Service Menu and Save Settings: Press the "ON/OFF" button to exit the service menu
and save the settings. The display goes blank.