Filter
Top Products
41
C. Service Flow Charts
1. Unit Will Not Start
Main Power Supply
Unit will not start
Problem Possible Cause Remedy
Emergency Stop Button
Pressed.
Turn clockwise to
reset.
ON/OFF Button
“OFF” position. Move to “ON” position.
Power Failure
Wait for recovery.
No Water Supply
Water failure. Wait for recovery.
Shut off valve closed. Open.
Strainer clogged. Clean.
Loose connection. Tighten.
Not within
specifications.
Refer to nameplate
and correct.
Off, blown fuse, or
tripped or defective
circuit breaker.
Turn on, replace, or
check and reset. Call
electrician if breaker
tri
p
s re
p
eatedl
y
.
Service Panel
Open. Close.
Service Panel Switch
Out of adjustment
and/or open.
Adjust and/or replace.
Continue