Filter
Top Products
44
Conveyor Speed
Too high.
Adjust to medium or
low.
Continue
Detergent
No supply.
See “III.C.5. No or
Inadequate
Detergent/Rinse Aid
Su
pp
l
y
.”
Insufficient supply.
Refill or adjust
detergent feeder.
Unspecified detergent
used.
Use specified
detergent only.
Check input/output
and repair or replace.
Control output error.
Reset manually.
Overheat thermostat
tripped.
Replace. Defective.
Replace.
Magnetic contactor
defective.
Wash Tank Water
Dirty.
Drain wash tank and
supply fresh hot water.
Temperature too low.
Raise setting or see
“Heater Not
Ener
g
ized”.
Temperature will not
rise.
Reset overheat
thermostat.
Heater Not Energized
Voltage
Too low. Call electrician.