Filter
Top Products
66
12) Check the pump filters inside the wash tank. If they
are clogged, clean them with a scouring pad.
Silverware
Pump Filter
11) Clean the wash compartment. Remove any scraps
from inside the wash compartment and wash tank.
Use a scouring pad to wash off heavy soils. Remove
any silverware left inside the wash compartment.
13) Check the water level sensor. If it is dirty, clean it with
a soft brush.
IMPORTANT
Do not use a metal brush to clean the water level sensor. The surfaces may be
damaged, or metal particles attached to the sensor may cause malfunction.
14) Replace the separators in their correct positions.
15) Install the left and right tank fi lters.
16) Insert the drain pipe.