Filter
Top Products
IntelliCarb Training Manual
© 2004, IMI Cornelius Inc. - 9 - Publication Number: TP01071
ICE DIVERTER KIT 02394
NOTE: For dispensing Scotsman, Wilshire, and Hoshizaki compressed ice cubes:
1. Disconnect power to dispenser.
2. Remove Merchandiser from dispenser.
3. Remove ice chute and discard gate restrictor.
4. Install ice diverter on gate mounting plate as shown below.
5. Apply RTV to back surface of ice diverter, to seal to gate mounting plate.
6. Reinstall gasket and ice chute.
7. Reinstall merchandiser and energize unit.
FIGURE 13
ICE CHU TE
ICE CHU TE
COVER
GATE MOUNTING PLATE
GASKET
STORAGE HOPPER
ICE D IVERT ER
10 -- 32 WA SHER
10 -- 32 NU T
APPLY RTV TO
THIS SURFACE TO
SEAL TO HOPPER
GATE MOUNTING
PLATE
FLANGE EXTENDS
INTO S TORAGE HOP-
PER THROUGHGATE
OPE NING