Cornelius Cold Beverage Dispenser Beverage Dispenser User Manual


 
IntelliCarb Training Manual
© 2004, IMI Cornelius Inc. - 11 - Publication Number: TP01071
POST-MIX VALVE SECTION
SET-UP INSTRUCTIONS
FIGURE 15
A side water lever kit can be added to a valve allowing for
dispensing of water without syrup or concentrate. The side
water lever can be added to either a carbonated drink valve
or a noncarbonated drink valve.
Post-mix valves control:
the ONOFF of syrup and water,
the flow rates of syrup and water,
the mixing of the two ingredients as they pour into the
cup, and
in some instances - dispensed portion.
Dimensions & Capacities
Fast Flow ............................................................................................................... 1 ½ to 3 oz./sec.
UFB-1 ......................................................................................................................... 2 to 4 oz./sec.
Ultra Flow .............................................................................................................. 3 to 4 ½ oz./sec.
Operational temperature range: ......................................................... 10°C (50°F) to 43°C (110° F)
Voltage requirements:................................................................................ 22 to 27 VAC (50/60 Hz)
Transformer (electronic valves) ........................................................................................80 VA min.
Operating Pressure (flowing)...............................................................................syrup = 20 psi min.
.............................................................................................................................water = 35 psi min.
Concentrates and juices that contain particulates must be dispensed from a juice valve.
A slanted drip tray is necessary when using an Optifill valve.
SYSTEM DETAILS
Water
Water Quality
Water quality issues have an affect on dispensing valves. Chloramine, a combination of chlorine and
ammonia is responsible for some degradation of rubber components. Chloramine is used in many U. S.
water supplies. Its affects can be minimized by installing and maintaining a water filtration system.
Ultra pure water affects the sensitivity of the Optifill™ valve. Because ultra pure water has less mineral
content, it reduces the conductivity of the water keeping the circuit open and overfilling the beverage
container.
Water Flow
The size of the orifice in the piston varies depending on whether the piston is used for syrup or water, and
whether it is high flow or ultra flow valve.
Concentrate valve sleeve
has only one hole
Syrup valve sleeve
has six holes
Mounting
screw
Water
lever
FIGURE 16