Jenn-Air JGS9900BD Oven User Manual


 
© 2006 Maytag Services 16026923 B – 15
Use & Care
Notes:
When using Convect Bake and Convect Pastry with the
Auto Convect Conversion option turned off, reduce the
set temperature by 25° F.
If Convect Roasting with the Auto Convect Conversion
option turned off, you will not be required to program a
cooking time. Check food at 75% of the conventional
time.
To reactivate Auto Convect Conversion:
1. Press Setup pad.
2. Select AUTO CONVECT.
3. Select ON.
4. Press Setup pad to exit the Setup menu.
Sabbath Mode
The oven is set to shut off after 12 hours if you accidentally
leave it on. The Sabbath Mode overrides the 12-hour shut-off
and can either be set to come on automatically or can be set
manually as desired.
Only Bake or Cook/Hold Bake will operate when the oven is in
Sabbath Mode. All other functions are invalid. If a function other
than Bake or Cook/Hold Bake is in operation when Sabbath
Mode starts, the function will be canceled.
To activate Sabbath Mode:
1. Press Setup pad.
2. Press the arrow to scroll.
3. Select SABBATH.
4. Select AUTO or MANUAL.
AUTO will automatically prompt you to enter a Bake
temperature on Friday at 2 pm and stay in Sabbath
mode for 33 hours. SABBATH and SABBATH ENABLE
appear in the display for 90 minutes. If Bake or Cook/
Hold Bake are desired during Sabbath Mode, they must
be programmed during this 90 minute time before AUTO
Sabbath Mode is active.
MANUAL sets the oven to Sabbath Mode for 72 hours.
SABBATH and SABBATH ENABLE appear in the display
for five minutes. If Bake or Cook/Hold Bake are desired
during Sabbath Mode, they must be programmed during
this five minute time before the MANUAL Sabbath Mode
is active.
5. Select ON or OFF.
6. Press Setup pad to exit the Setup menu.
To cancel Sabbath Mode:
Press and hold the Setup pad for five seconds.
The Bake mode may be cancelled by pressing
the CANCEL pad during Sabbath.
Temp Adjust
Oven temperatures are carefully tested at the factory. It is
normal to notice some baking time or browning differences
between a new oven and an old one. As ovens get older, the
oven temperature can shift.
You may adjust the oven temperature if you think the oven is
not baking or browning correctly. To decide how much to
change the temperature, set the oven temperature 25° F higher
or lower than the temperature in your recipes, then bake. The
results of the first bake should give you an idea of how much to
adjust the temperature.
To adjust the oven temperature:
1. Press Setup pad.
2. Press the arrow to scroll.
3. Select TEMP ADJUST.
4. Enter the desired temperature change using the number
pads.
5. Select “+/-” to indicate an increase or decrease in
temperature. The temperature change is displayed at the
top of the window.
6. Press Enter pad or wait three seconds to accept the change.
7. Press Setup pad to exit the menu.
The oven temperature does not need to be readjusted if there is
a power failure or interruption.
Broiling and cleaning temperatures cannot be adjusted.
C/F
The displayed temperature scale can be changed from
Fahrenheit to Celsius.
To change the scale:
1. Press Setup pad.
2. Use the arrow to scroll to the next screen.
3. Select C/F.
4. Select the desired temperature scale.
5. Press Setup pad to exit the Setup menu.
Notes:
The oven must be idle to program Sabbath Mode.
Sabbath Mode cannot be turned on if the keypads are
locked out or when the door is locked.
If the oven is baking when Auto Sabbath Mode starts,
there will be no audible beeps.
All prompts, messages and beeps are deactivated when
the Sabbath Mode is active.
If the oven light is desired while in Sabbath Mode, it
must be turned on before the Sabbath Mode is set.
The self-clean cycle and automatic door lock do not
operate during the Sabbath Mode.
The Bake temperature can be changed during an Active
Sabbath Mode. Simply press the Bake pad and then
enter the desired temperature using the Quick set pads.
Pressing the CANCEL pad will cancel a Bake cycle,
however the control will stay in the Sabbath Mode.
The day of the week and AM/PM must be set for
Sabbath Mode to operate correctly.