Filter
Top Products
18
Setting Oven Controls
SETTING THE WARM & HOLD™ FEATURE
The pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170° F (77°C). The
feature will keep oven baked foods warm for serving up to 3 hours after cooking has nished. After 3 hours
the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other
cooking operations or can be used after cooking has nished using TIMED BAKE or DELAY START BAKE.
1. Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.
2. Press
. " " will appear in the display and the Warm & Hold indicator light above the pad will turn ON.
Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared.
3. Press
or to start.
4. To turn Warm & Hold OFF at any time press
. The Warm & Hold indicator light above the pad will turn OFF.
1. Arrange interior oven racks and place food in oven. Set the oven properly for or Delay Start Bake.
2. Press
. The Warm & Hold indicator light above the pad will turn ON.
3. Warm & Hold is set to turn ON automatically after Timed Bake or Delayed Start Bake has nished.
4. To turn Warm & Hold OFF at any time press
. The Warm & Hold indicator light above the pad will turn OFF.
TO OPERATE THE OVEN LIGHT
The interior oven light will automatically turn ON when the oven door is opened. Press to turn the interior oven light ON
and OFF whenever the oven door is closed.
The interior oven light is located at the upper right rear wall of the oven interior and is covered with a glass shield held by
a wire holder. The glass shield must be in place whenever the oven is in use. To change the interior oven light, see “Changing
the Oven Light” in the General Care & Cleaning section in the Use & Care Manual supplied with the appliance.