Filter
Top Products
Troubleshooting
WHAT TO DO
No action is needed. Burner
operation is not affected and the
sparking should end when the knob
is moved from LITE.
Contact service technician to replace
module.
Contact a qualified electrician to
correct wiring, if needed.
Push control knob(s) in before
turning to a setting.
No action is needed.
Wait for the start time to be reached,
or cancel and reset the control.
Call a service technician to repair.
Odors are normal when the range is
new. The odors will disappear as the
oven is used.
PROBLEM
Burners spark
The surface
burner controls
will not turn
Cooling fan runs
during BAKE,
CONVECT
BAKE, CON-
VECT ROAST,
BROIL, CON-
VECT BROIL or
CLEAN
The convection
fan does not
run all the time
The Self-
Cleaning cycle
will not operate
Odor from oven
POSSIBLE CAUSE
It is normal for all four
burners to spark when a
burner is turned on, but has
not yet ignited.
Continuous sparking may be
caused when:
—There is a faulty spark
module.
—The wall outlet wiring is
incorrect.
You are not pushing in
before turning.
It is normal for the fan to
automatically run while the
oven is in use to cool the
electronic control.
It is normal for the
convection fan to shut off
when the door is opened.
You have programmed a
delayed start time.
An “F” code appears on the
display.
Heating of insulation.
continued on next page
31
4452761Av04c52 1/11/00 8:18 AM Page 31