Filter
Top Products
19
ENGLISH
GENERAL INSTRUCTIONS
To Attach
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by
turning it counterclockwise, and
remove the attachment hub cover
or flip up hinged hub cover.
4. Insert the attachment shaft housing
into the attachment hub, making
certain the attachment power shaft
fits into the square attachment hub
socket. It may be necessary to
rotate the attachment back and
forth. When the attachment is in
proper position, the pin on the
attachment will fit into the notch on
the hub rim.
5. Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
to mixer.
6. Plug into a grounded
3 prong outlet.
To Remove
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by
turning it counterclockwise. Rotate
the attachment slightly back and
forth while pulling it out.
4. Replace the attachment hub cover.
Tighten attachment knob by turning
it clockwise.
Electrical Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove
ground prong.
Do not use an adapter.
Do not use an
extension cord.
Failure to follow these
instructions can result
in death, fire, or
electrical shock.
WARNING
001-019PIL1348700 Sec1:19 10/2/07 8:30:01 AM