Filter
Top Products
19
LEVELING THE REFRIGERATOR DOORS (CONT.)
DOOR ALIGNMENT
1
• Remove the Base Grillie.
• Turn the leveling legs(CCW) to raise or
(CW) to lower the height of the front of the
refrigerator by using flat blade screw driver
or 11/32" wrench.
• Use the wrench (Included with the User
Manual) to adjust the bolt in the door hinge
to adjust the height.(CCW to raise or CW to
lower the height.)
STARTING
Before loading your refrigerator with fresh foods:
• Remove tape and any temporary labels from
your refrigerator before using. To remove any
remaining adhesive residue, rub the area
briskly with your thumb, or rub a small amount
of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry. Do not
use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to
remove tape or glue.
NOTE: Do not remove any warning-type labels,
the model and serial number label, or the tech
sheet that is attached to the back wall of the
refrigerator.
• Thoroughly clean your refrigerator and wipe off
all dust that may have accumulated during
shipping.
• Install accessories such as the ice cube bin,
drawers, shelves, in their proper places.
They are packed together to prevent possible
damage during shipment.
• Adjust the desired temperature for the
refrigerator and freezer (see Adjusting the
Temperature and Functions).
• Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold
air in the freezer compartment to ensure proper
cooling. Your refrigerator is now ready for use.