Filter
Top Products
24
SETTING THE FUNCTIONS
SETTING THE DISPENSER LOCK
Press and hold the LOCK
button for three seconds to
lock the dispenser and all
of the other control panel
functions. Press and hold
again for 3 seconds to
unlock.
SETTING THE DOOR ALARM
The DOOR ALARM button
also controls the door
alarm that sounds three
times in 30-second
intervals when a
compartment door is left
open for more than 60
seconds. The alarm stops
sounding when the door is
closed.
Press the DOOR ALARM button once to activate
and deactivate the door alarm function.
NOTE: Contact your local service center if the
alarm continues to sound after the doors are
closed.
RESETTING THE FILTER INDICATOR
Press and hold the FILTER
RESET button for more
than 3 seconds to reset
the filter indicator after the
water filter has been
replaced.
NOTE: It is recommended that you replace the
filter when the water filter indicator light reaches
0 or whenever the water or ice cube taste
deteriorates noticeably.
ACTIVATING ICE PLUS
Press the ICE PULS
button once to activate the
Ice Plus function. The ICE
PULS icon on the display
panel will illuminate when
activated.
The Ice Plus function runs
the freezer compartment at
the coldest setting for a 24-hour period to
increase icemaking by up to about 20%, and
then turns off automatically.
NOTE: Press the button again to cancel the Ice
Plus function.
Press the button for the desired function to view
and select other settings.
REFR
GERATO
LOCK 3SECS
FILTER RESET
DOOR ALARM
ICE PULS
DIAGNOSTIC FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will
appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and
then call 1-800-243-0000 (24 hours per day/7 days per week) and select the option to locate an
authorized servicer.